Español Hot Slip POF Shrink Film
High clarity transparency for product visibility
High clarity transparency for product visibility
High slip surface (COF 0.20-0.25) for smooth feeding
Balanced MD/TD shrinkage (60-75%) for wrinkle-free wrap
Excellent hot tack for instant seal strength
Anti-static treatment option available
Precision wound rolls – no telescoping or edge wrinkles
Thin gauge options (10um 12μm, 15μm,19um ) for cost saving
Good low-temperature flexibility (down to -50°C)
FDA approved for direct food contact
Solve sticking problem Eliminates inter-pack adhesion – no more manual separation
Increase line speed Enables fully automatic cartoning without jams
Reduce labor cost No need for operators to separate sticky packs
Improve efficiency Smooth conveyor transfer from shrink tunnel to boxing station
Clean operation No powder or coating residue on film surface
Consistent quality Uniform anti-block performance across all thicknesses
Wide compatibility Works on most shrink wrappers and tunnels
Free samples Test on your own line before ordering
| UP-HS Hot Slip Polyolefin Shrink Film | ||||||||
| TEST ITEM | UNIT | ASTM TEST | TYPICAL VALUES | |||||
| THICKNESS | 40G | 48G | 60G | 75G | 100G | |||
| Tensile strength (MD) | N/mm² | D882 | 115 | 110 | 110 | 105 | 100 | |
| Tensile strength (TD) | 110 | 105 | 105 | 100 | 95 | |||
| Elongation(MD) | % | 115 | 110 | 115 | 120 | 125 | ||
| Elongation(TD) | 110 | 105 | 110 | 115 | 120 | |||
| Tear (MD) | g | D1922 | 12.0 | 11.0 | 14.0 | 16.0 | 24.0 | |
| Tear (TD) | 10.0 | 9.5 | 12.0 | 15.0 | 22.0 | |||
| SEAL strength(MD) | N/mm | F88 | 0.75 | 0.68 | 0.83 | 1.10 | 1.20 | |
| SEAL strength(TD) /HOT WIRE SEAL | 0.80 | 0.71 | 0.85 | 1.08 | 1.33 | |||
| COF Dynamic (Film to film) | D1894 | 0.23 | 0.19 | 0.17 | 0.16 | 0.19 | ||
| COF Static | 0.25 | 0.20 | 0.18 | 0.17 | 0.20 | |||
| Dynamic(Hot Slip)@60℃ | 0.29 | 0.27 | 0.26 | 0.25 | 0.23 | |||
| Haze | D1003 | 2.40 | 2.30 | 2.80 | 3.60 | 4.10 | ||
| Clarity | D1746 | 99.0 | 97.2 | 96.5 | 95.0 | 93.0 | ||
| Gloss @ 45deg | D2457 | 88.0 | 86.0 | 84.0 | 83.5 | 82.0 | ||
| Oxygen Transmission Rate | cc/m³/day | D3985 | 13100.0 | 11800.0 | 11000.0 | 8500.0 | 6700.0 | |
| Water Vaper Transmission Rate | gm/m³/day | F1249 | 52.0 | 48.5 | 37.5 | 28.6 | 23.5 | |
| Free Shrinkage | MD | TD | ||||||
| 100℃ | % | D2732 | 20.00 | 29.00 | 20.00 | 26.00 | ||
| 110℃ | 38.00 | 40.00 | 35.00 | 45.00 | ||||
| 120℃ | 58.00 | 58.00 | 56.00 | 61.00 | ||||
| 130℃ | 66.00 | 65.00 | 64.00 | 66.00 | ||||
| Shrink Tension | Mpa | D2838 | MD | TD | ||||
| 100℃ | 1.70 | 2.55 | 1.85 | 2.65 | ||||
| 110℃ | 2.60 | 3.40 | 2.70 | 3.45 | ||||
| 120℃ | 2.80 | 3.55 | 2.85 | 3.65 | ||||
| 130℃ | 2.55 | 3.25 | 2.65 | 3.30 | ||||
| Storage conditions required : Below 30 degrees Celsius, no direct sunlight. | ||||||||
| Maximum storage time: 12 months. | ||||||||
A Professional Manufacturer Specializing in POF Shrink Films and Flexible Packaging Solutions
No.216 1446 Wutai Mountain Road,Huang District,Qingdao,China
COPYRIGHT © 2026 UMI PACKING CO.,LTD.
Powered By HiCheng
